Chrysler Pt Cruiser: ALTERNATOR

REMOVAL - 2.2 DIESEL (1) Disconnect the negative battery cable.
(2) Remove the front grill, refer to the Body section
for more information.
(3) Remove the hood seal, refer to the Body section
for more information.
(4) Remove the upper radiator crossmember.
(5) Remove ambient temperature sensor.
(6) Raise vehicle and support.
(7) Drain radiator, refer to the Cooling section for
more information.
(8) Disconnect the electrical connector for the radiator
fan.
(9) Remove A/C refrigerant. Refer to the Air Conditioning
section for more information.
(10) Remove the underbody plate (skid plate), refer
to the Body section for more information.
(11) Remove the lower radiator hose and the 2
inner cooler hoses.
(12) Remove the right front tire.
(13) Remove the splash shield.
(14) Remove the accessory drive belt, refer to the
Cooling section for more information.
(15) Lower vehicle.
(16) Disconnect the A/C lines from the condenser
and plug and cap.
(17) Remove the upper radiator hose.
(18) Remove the radiator, condenser, and inner
cooler assembly
(19) Loosen the 2 lower mounting bolts for the
generator and remove the accessory drive idler pulley
and bracket (Fig. 23).
(20) Disconnect the wiring connectors from the
back of the generator (Fig. 24).
NOTE: The orientation of the generator, it will fit
onto the bracket backwards. If this occurs damage
to the generator will happen.
(21) Remove the A/C line from the compressor.
(22) Remove the 2 upper bolts and the 2 lower
bolts and remove generator as assembly.

Good luck...

Hans4040 1435

7 jaar